high profile common rail test bench(F-815C) TOUCH SCREEN TYPE
Features:
1)It can be used to test both common rail injectors and common rail pumps.
2)It has two measurement systems: with flow sensor and glass tube to show diesel volume. Each system can work independently.
Introductions:
1)F-815C Common rail pump test bench adopts the full-automatic control,based on widows operate software has more than 900 test plan stored in the computer,it can be added and edit the test plans by the users.
2)Itergrated with high-precision flow sensor or weight sensor(according to buyer's request) and original BOSCH CP1 /CP3 pump and BOSCH Common rail body(with DRV valve),makes the machine with high measurement accuracy and reliable working functions.
3)The test result can be finished automatically and print out.
Technical parameters of common rail test bench:
| working voltage | AC 380V/3PHASE 50-60HZ |
| output power | 15kw(we recommend machine has some residual power) |
| rail pressure range | 0-2000bar |
| rail pressure control accuracy | +/-0.5Mpa |
| fuel pump rotation speed | 0-4000RPM |
| diesel filter accuracy | <5u |
| injector sensor range | 0.1ml-600ml |
| Injector Sensor Accuracy | 0.1% |
| pump sensor range | 10ml-3000ml |
| pump sensor accuracy | 0.5% |
| net weight | 900kg |
Test Interface of common rail test bench:
Configuration(we can install the machine according to the requirements-cuscomization service):
1)With BOSCH CP1 or CP3 pump
2)Fuel weight sensor(it has lower requirements with the test diesel quality and not easy to be damaged)
You can also choose the flow sensor instead of weight sensor,this sensor was imported from Europe,has high accuracy (it has higher requirements with test diesel quality)
3)Inverter,because the inverter are very important with the using time of the machine,we use only the LG,TECO,AND DELTA brands.
4)Whole look of inside photo:
FUNCTIONS:
Common rail pump tes&common rail injector test:
- Can drive different kinds of high-pressure pumps like BOSCH CP1/CP2/CP3,DELPHI CRSP,DENSO HP3/HP4,SIEMENS DCP and DENSO HP0(optional).
- Test the flow control valve of the common rail pumps.
- Test the sealing of the CR injectors,test the fuel injection&back flow volume under the working conditions of full load,emission,idle speed and pre-injection.
Promotion information:
If you buy the common rail test bench now,we give the following common rail pump dismantle tools free cost along with the machine:
Remeber our website:http://www.dieselinjectiontest.com for diesel injection test equipment,we will give you more promotion information and new products!
Contact:Mr. Gao
Skype:chinadiesel
Email:gao@dieselinjectiontest.com
Tel/whatsapp:+8615725832131
|
|
high profile common rail test bench(F-815C) Images
|
